- 1 in Drive Size
- 2100 ft-lb Maximum Reverse Torque
- 5500 rpm Free Speed
description
- The 2850MAX 1” D-handle 6 inch extended anvil Impact Wrench, our fiercest 1” wrench, engineered to make quick work of big jobs like semi, bus and tractor tires. This tool has been made lighter, pushed harder and worked longer to make sure it can handle repeated demands without sacrificing power. Every time you need extreme torque, this lightweight boss can get the job done.
features
- POWER: Nothing matters more than torque when you’re up against massive jobs. The 2850MAX is our fiercest 1” wrench yet, loaded with extreme power that lasts as long as you need and continuously delivers over time.
- DURABILITY: Steel-tough to its core, this heavy-duty impact wrench has been run harder and pushed farther to make sure it can withstand what you throw at it. Because when it comes to REAL WORK, downtime is not an option.
- ERGONOMICS: We reduced the tool’s weight without sacrificing what matters most—torque. The 2850MAX is also ergonomically designed for less fatigue.
- Solid steel impact mechanism: Deliver 2,100 ft- lbs of torque
- Highly engineered design: Delivers the power you need over the life of the tool
- Steel core design: Nothing’s been proven to last longer
- Chemical resistant housing & steel core: Stands up to drops and harsh work environments
- Lightweight: 25% lighter than the industry’s leading 1” wrench
- 360° adjustable handle: The side handle rotates fully around the tool as the job demands
- Swivel hose connection: Keeps cords from getting tangled so you can move freely around the garage
- 6” anvil extension: Increases accessibility in hard to reach places
| Hose Size [Min] | 3/4 in |
| Exhaust Location | Top |
| Forward/Fastening Torque | 2000 ft-lb, 2712 nm |
| Torque [Max] | 2100 ft lb |
| Vibration Level | 10.3 m/s2 |
| Duty Rating | Maintenance Duty |
| Air Inlet Type | NPT |
| Actuation | Inside Trigger |
| Series | 2850MAX Impact Wrench |
| Handle Type | D-Handle |
| Power to Weight Ratio | 97.2 ft-lb/lb |
| End Plates | Aluminum with Steel Wear Plate |
| Power Source | Air Powered |
| Blows/Impacts Per Minute | 770 blows/min |
| Air Inlet | 1/4 in |
| Bolt Dia. [Max] | 1 1/4 in |
| Air Consumption [Average] | 14 cfm, 397 I/min |
| Retainer Type | Friction Ring and Thru-hole |
| Length | 13.100 in |
| Type | Full-Size |
| Air Pressure | 90 psi |
| Free Speed Sound Pressure/Power | 105.0 / 116.0 Db |
| Drive Size | 1 in |
| Free Speed | 5500 rpm |
| Warranty | 2 Years |
| Motor | Reverse Bias |
| Anvil Length | 6 in Extended |
| Hammer Case | Steel |
| No. of Vanes | 7 |
| Pressure [Max] | 6.2 Bar |
| Housing Material | Composite Housing and Steel Reinforced Frame |
| Reverse Torque [Max] | 2100 ft-lb, 2847 nm |
| Impacting Sound Pressure/Power | 96.7 / 107.7 Db |
| Hose Size | 0.75 in |
| Air Consumption @ Load | 56 cfm, 1587 I/min |
| No. of Power Settings | 3 |
| Standard | ISO 11148-6, Cagi B186, ISO 28927-2, ISO 15744 |
| Drive Type | Square |
| Inlet Size | 1/2 in NPTF |
| Weight | 24.36 LB |
| EAN or UPC | 663023139647 |

