Find a Service Center
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 60 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Min] | 1.438 in |
| Hub Type | C |
| Bore Size [Max] | 4 in |
| Material | Cast Iron |
| Belt Width | 2 in |
| Bore Range [Max] | 4 in |
| Material Internal Use | Cast Iron |
| Pitch Diameter | 16.711 in |
| Length Through Bore | 4 in |
| Teeth Face Width | 2.563 in |
| Bore Type | Bushed |
| No. of Teeth | 60 |
| Outside Dia. | 16.601 in |
| Bore Range [Min] | 1.4375 in |
| Bushing Bore Size [Min] | 1.438 in |
| Finished Bore | N/A |
| Construction Internal | Spoked |
| Width Across Teeth | 2.563 in |
| Hub Dia. | 8 1/2 in |
| Hub Projection | 0.719 in |
| Pitch Dia. | 16.711 in |
| Material External Use | Cast Iron |
| Belt Pitch | 7/8 in |
| Bushing Type | Taper-Lock |
| Belt Size | XH |
| Type | C-3 |
| Bushing Series | 4040 |
| Bushing Bore Size [Max] | 4 in |
| Weight | 75.0 LB |
| EAN or UPC | 697950084091 |
