Find a Service Center
Boston Gear
760-60F-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101853872
- 5 Input Motor hp
- 700 Series
- 6 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Max] | 10999 lb-in, 1249 Nm |
| Output Speed | 29.2 rpm |
| Input Motor HP | 5 |
| Base to Shaft Center Height w/Std. Base Kit | 7 3/4 in |
| HP @ RPM | 5 hp @ 1800 rpm |
| Lubrication | None |
| Fan Cooled | Yes |
| Motor Application | General Purpose |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Output Configuration | Left Output |
| Ratio | 60:1 |
| Box Length | 14 1/2 in |
| Series | 700 |
| Base to Centerline of Input Shaft | 12 1/2 in |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Frame | N/A |
| Output Torque Rating Range [Min] | 8000 lb-in, 900 Nm |
| Max. Input HP @ 100 rpm | 0.74 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 9.63 in |
| Output Bore Shaft Dia. | 2.25 in |
| Max. Thrust Load @ RPM | 2100 lb/in @ 1150 rpm, 2100 lb/in @ 1750 rpm |
| Standard | AGMA Service Class II |
| Bolt Centers w/ Std. Base Kit (in) | 16 1/2 x 9 1/2 |
| Input (Shaft or Bore) Size | 1 1/2 in |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 16 1/2 in x 9 1/2 in |
| Box Width | 8 1/8 in |
| Bolt Center | 16 1/2" x 9 1/2" |
| Torque Out @ 1750 rpm | 9528 in lb |
| Rated Efficiency | 70% |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance Code | 760 |
| Output Shaft | Solid |
| Input Configuration | Shaft Input |
| Output Shaft Projection | Solid Left Output |
| Output Torque | 9528 lb-in |
| Family Name | Std Unit |
| Shaft Assembly Code | G |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Max. Overhung Load @ RPM | 2400 lb/in @ 1150 rpm, 2400 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 6 1/2 in |
| Reduction Type | Single |
| Max. Overhung Load @ 1750 rpm | 2400 lb/in |
| Base Mounting Attachment | No Base |
| Torque Out @ 1150 rpm | 11000 in lb |
| Center Distance | 6 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 7.31 in |
| Media Mapping Output | G |
| Output (Shaft or Bore) Size | 2 1/4 in |
| Box Height | 16 1/2 in |
| Style | Right Angle |
| Input Power Rating | 6.29 hp, 4.69 kW |
| Bolt Centers w/ Vertical Base Kits (in) | 20.88 x 11.75 |
| Input HP @ RPM | 4.84 hp @ 1150 rpm, 6.29 hp @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 2100 lb/in |
| Output Torque @ RPM | 9528 in lb @ 1750 rpm, 11000 in lb @ 1150 rpm |
| Frame Size | Shaft Input, Not a C-Face |
| Material | Cast Iron, Standard Paint |
| Weight | 255.1 LB |
| EAN or UPC | 781711468180 |
