Boston Gear
F724-60-B5-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833980
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 724 |
| Base Mounting Attachment | No Base |
| Media Mapping Output | H |
| Input Motor HP | 0.75 |
| Output Speed | 29.2 rpm |
| Output Shaft | Solid |
| Box Length | 6 3/8 in |
| Material | Cast Iron, Standard Paint |
| Bore Code | B5 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Torque Out @ 1150 rpm | 1040 in lb |
| Media Mapping Style | F |
| Center Distance | 2.375 in |
| Rated Efficiency | 71% |
| Output Configuration | Left & Right Output |
| Reduction Type | Single |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Family Name | F |
| Output Shaft Projection | Solid Double Projecting Output |
| Fan Cooled | No |
| Box Height | 6 15/16 in |
| Ratio | 60:1 |
| Motor Frame Size | B556C |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Center | 5 in x 2 7/8 in |
| Output Bore Shaft Dia. | 1.125 in |
| Box Width | 5 7/16 in |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Frame Size | 56C |
| Lubrication | None |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Configuration | C-Face Quilled |
| Standard | AGMA Service Class I |
| Washdown Duty | No |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Frame | 56C |
| Motor HP | 1/2 hp |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Series | 700 |
| Housing Material | Cast Iron |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque | 1128 lb-in |
| Shaft Assembly Code | H |
| Center Distance Code | 724 |
| Torque Out @ 1750 rpm | 1128 in lb |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Worm Position | Universal |
| Weight | 30.1 LB |
| EAN or UPC | 781711520123 |
