Find a Service Center
Boston Gear
F730-15-B9-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101784177
- 3 Input Motor hp
- 700 Series
- 3 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Not recommended for use with bolted clamps
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Motor Frame Size | B9180TC210C |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Torque Out @ 1750 rpm | 1969 in lb |
| Torque Out @ 1150 rpm | 2425 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance Code | 730 |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Lubrication | None |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Center Distance | 3 in |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Ratio | 15:1 |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Output Torque | 1969 lb-in |
| Output Speed | 116.7 rpm |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 1.25 in |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Output Shaft Projection | Solid Left Output |
| Base Mounting Attachment | No Base |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Worm Position | Universal |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Frame Size | 180TC, 210C |
| Box Length | 8 1/8 in |
| Use With | 730 |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Input Motor HP | 3 |
| Standard | AGMA Service Class II |
| Motor Application | General Purpose |
| Input Power Rating | 3.97 hp, 2.96 kW |
| Box Height | 8 7/8 in |
| Washdown Duty | No |
| Input Configuration | C-Face Quilled |
| Media Mapping Output | G |
| HP @ RPM | 3 hp @ 1800 rpm |
| Rated Efficiency | 92% |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Housing Material | Cast Iron |
| Fan Cooled | No |
| Output Configuration | Left Output |
| Frame | 180TC, 210C |
| Bolt Center | 7 in x 4 in |
| Box Width | 6 49/64 in |
| Output Shaft | Solid |
| Series | 700 |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Weight | 55.1 LB |
| EAN or UPC | 781711606919 |
