Find a Service Center
Boston Gear
F732-15F-B9-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871685
- 5 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Frame | 180TC, 210C |
| Use With | 732 |
| Torque Out @ 1750 rpm | 2782 in lb |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Center Distance | 3.25 in |
| Box Height | 9 3/8 in |
| Media Mapping Output | H |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Style | Right Angle |
| Bore Code | B9 |
| Motor Application | General Purpose |
| Ratio | 15:1 |
| Output Speed | 116.7 rpm |
| Keyway Size | 1/4 x 1/8 |
| Input Power Rating | 5.8 hp, 4.325 kW |
| Motor Frame Size | B9180TC210C |
| Shaft Assembly Code | H |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Torque Out @ 1150 rpm | 2600 in lb |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Rated Efficiency | 89% |
| Input HP @ RPM | 3.63 hp @ 1150 rpm, 5.8 hp @ 1750 rpm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Family Name | F |
| Motor HP | 5 hp |
| Series | 700 |
| Box Length | 9 in |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Fan Cooled | Yes |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Frame Size | 180TC, 210C |
| Installed Options | Fan |
| Washdown Duty | No |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output Bore Shaft Dia. | 1.375 in |
| Reduction Type | Single |
| Output Configuration | Left & Right Output |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Shaft | Solid |
| Center Distance Code | 732 |
| Output Shaft Projection | Solid Double Projecting Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Bolt Center | 7 1/2 in x 4 in |
| Input Motor HP | 5 |
| Output Torque @ RPM | 2600 in lb @ 1150 rpm, 2782 in lb @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Box Width | 7 9/16 in |
| Lubrication | None |
| Housing Material | Cast Iron |
| Media Mapping Style | F |
| Output Torque | 2782 lb-in |
| Max. Input HP @ 100 rpm | 0.48 hp |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Worm Position | Universal |
| Weight | 66.1 LB |
| EAN or UPC | 781711533468 |
