Find a Service Center
Boston Gear
HF7718-10-B5-H-P16
700 Series 10:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101794155
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| Torque Out @ 1750 rpm | 536 in lb |
| Use With | 718 |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Style | Right Angle |
| Output Shaft | Hollow |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Center Distance Code | 718 |
| Box Width | 4 37/64 in |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Media Mapping Style | HF |
| Frame | 56C |
| Input Motor HP | 1.50 |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Box Length | 5 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Shaft Projection | Hollow Output |
| Bore Code | B5 |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Ratio | 10:1 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Output Speed | 175 rpm |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class I |
| Material | Cast Iron, Standard Paint |
| Worm Position | Universal |
| Output Bore Shaft Dia. | 1 in |
| Frame Size | 56C |
| Input (Shaft or Bore) Size | 5/8 in |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 92% |
| Box Height | 5 3/4 in |
| Lubrication | None |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output Configuration | Hollow Output |
| Shaft Assembly Code | H |
| Output Torque | 536 lb-in |
| Motor Frame Size | B556C |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Fan Cooled | No |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Torque Out @ 1150 rpm | 480 in lb |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Media Mapping Output | H |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Washdown Duty | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Center Distance | 1.75 in |
| Series | 700 |
| Motor Application | General Purpose |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Motor HP | 1 hp |
| Reduction Type | Single |
| Input Configuration | C-Face Quilled |
| Family Name | HF |
| Media Mapping Hollow Bore | P16 |
| Weight | 20.1 LB |
| EAN or UPC | 781711630143 |
