Find a Service Center
Alternate Products
- 12 Diametral Pitch
- 14.5⁰ Pressure Angle
- 16 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Face Width | 0.75 in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 900 RPM | 139 lb/in |
| Rated Torque [Max] | 103 @ 1800 rpm |
| Origin | Finished Bore |
| Diametral Pitch | 12 |
| Hub Dia. | 0.98 in |
| Torque at 600 RPM | 157 lb/in |
| Bore Size | 0.625 in |
| Bore Type | Bored to Size |
| Bore Dia. | 0.63 in |
| Torque at 200 RPM | 190 lb/in |
| Material | Steel |
| Outside Dia. | 1.5 in |
| Type | A |
| O.D. | 1.5 in |
| Torque at 1200 RPM | 125 lb/in |
| Torque at 1800 RPM | 103 lb/in |
| No. of Teeth | 16 |
| Set Screw Size | 5/8 |
| Keyway | With Keyway |
| Length Through Bore | 1.250 in |
| Pitch Diameter | 1.333 in |
| Pitch Dia. | 1.333 in |
| Outside Dia. [Min] | 1.5 in |
| No. of Teeths | 16 |
| Set Screw | Yes |
| Pressure Angle | 14 1/2 degrees |
| Torque at 300 RPM | 180 lb/in |
| Weight | 0.311 LB |
| EAN or UPC | 781711460658 |
