Find a Service Center
Boston Gear
RF713-15-B5-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871087
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 262 in lb @ 1150 rpm, 305 in lb @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Configuration | C-Face Coupled |
| Standard | AGMA Service Class II |
| Media Mapping Output | G |
| Torque Out @ 1150 rpm | 262 in lb |
| Bolt Center | 3 1/4" x 2" |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Frame | 56C |
| Output Configuration | Left Output |
| Housing Material | Cast Iron |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Center Distance Code | 713 |
| Input Motor HP | 0.50 |
| Worm Position | Universal |
| Ratio | 15:1 |
| Motor Application | General Purpose |
| Output Torque | 305 lb-in |
| Reduction Type | Single |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Style | Right Angle |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Output (Shaft or Bore) Size | 5/8 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Base Mounting Attachment | No Base |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Series | 700 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Media Mapping Style | RF |
| Motor Frame Size | B556C |
| Use With | 713 |
| Box Length | 4 1/4 in |
| Rated Efficiency | 86% |
| Fan Cooled | No |
| Box Width | 4 1/32 in |
| Output Shaft | Solid |
| Max. Input HP @ 100 rpm | 0.049 hp |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Family Name | RF |
| Box Height | 4 21/32 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bore Code | B5 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance | 1.33 in |
| Output Speed | 116.7 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Motor HP | 0.5 hp |
| Lubrication | None |
| Washdown Duty | No |
| Input HP @ RPM | 0.37 hp @ 1150 rpm, 0.66 hp @ 1750 rpm |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Shaft Assembly Code | G |
| Torque Out @ 1750 rpm | 305 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Weight | 18.1 LB |
| EAN or UPC | 781711526262 |
