RFWC760-150E-B9-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871432

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

HP @ RPM	5 hp @ 1800 rpm
Output (Shaft or Bore) Size	2 1/4 in
Max. Overhung Load @ 1750 rpm	2400 lb/in
Box Width	19 1/8 in
Output Configuration	Left Output
Box Height	16 1/2 in
Bolt Centers w/ Std. Base Kit (in)	16 1/2 x 9 1/2
Base to Shaft Center Height w/High Vert. Base Kit	9.63 in
Family Name	RFWC
Keyway Size	1/4 x 1/8
Lubrication	None
Output RPM @ 1750 rpm Input	11.67 rpm
Bolt Center	12 3/4" x 6 3/8"
Input Configuration	C-Face Coupled
Max. Thrust Load @ 1150 rpm	2100 lb/in
Torque Out @ 1750 rpm	17000 in lb
Housing Material	Cast Iron
Frame Size	180TC, 210C
Washdown Duty	No
Base to Shaft Center Height w/Low Vert. Base Kit	7.31 in
Center Distance	6 in
Shaft Assembly Code	G
Bolt Centers w/ Vertical Base Kits (in)	20.88 x 11.75
Base to Shaft Center Height w/Std. Base Kit	7 3/4 in
Box Length	10 7/8 in
Frame	180TC, 210C
Thermal Input Horsepower @ 1750 RPM	N/A
Torque Out @ 1150 rpm	N/A
Input (Shaft or Bore) Size	1 1/8 in
Reduction Type	Double Reduction
Ratio	150:1
Base to Centerline of Input Shaft	N/A
Bore Code	B9
Worm Position	Universal¦Right Angle
Motor HP	5 hp
Fan Cooled	No
Base to Centerline of Output Shaft	6 1/2 in
Motor Application	General Purpose
Weight	341.1 LB
EAN or UPC	781711531471