Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Bore Size | 0.625 in |
| Outside Diameter (in) | 2 |
| Hub Diameter (in) | 1.625 |
| Hub Projection (in) | 0.5 |
| Pitch Diameter (in) | 1.875 |
| Bore (Max) (in) | 0.625 |
| Number of Teeth/Threads | 30 |
| Bore Type | Bored to Size |
| Standards Met | AGMA |
| Face Width (in) | 0.5 |
| Pitch Diameter | 1.875 in |
| No. of Teeth | 30 |
| Pressure Angle | 14 1/2 degrees |
| Diametral Pitch | 16 |
| Overall Length (in) | 1 |
| Length Through Bore | 1.000 in |
| Bore (Min) (in) | 0.625 |
| Length Through Bore (in) | 1 |
| Bore Size (in) | 0.625 |
| Material | Steel |
| Weight | 0.62 LB |
| EAN or UPC | 662289167142 |
