Skip to content Skip to navigation menu
Raider® C Face Quilled Input Left &/or Right Output Worm Gear Reducer

133Q56L15

Raider® C Face Quilled Input Left &/or Right Output Worm Gear Reducer
Item #101432292
  • 1.33 in Center Distance
  • 15:1 Ratio
  • 56C Frame Size
Raider® C Face Quilled Input Left &/or Right Output Worm Gear Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.33 in Center Distance
  • 15:1 Ratio
  • 56C Frame Size

features

  • Rugged Cast-Iron Housing: Provides maximum strength and dependability.
  • High lead angle worm is case hardened, ground and polished.
  • Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
  • Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
Output RPM @ Input RPM 117 rpm @ 1750 rpm
Torque Out @ 1150 rpm 246 in lb
Max. Thrust Load @ RPM 1156 lbf @ 1750 rpm, 1311 lbf @ 1150 rpm
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Box Height 4.66 in
Output Torque 292 in-lbs @1750 Input RPM
Input Keyway (C Face) 3/16 x 3/32
Reducer Worm - Right Angle
Max. Thrust Load @ 1150 rpm 1311 lbf
Output Key 3/16 x 1.31
Input Style C-Face Quill
Output Shaft OHL [Max] 458
Output Shaft Assembly Code L
Output Speed 116.6 rpm
Series Raider
Thermal Input Horsepower 0.642 @ 1750 Input
Output Shaft Direction Left
Center Distance Range 1 in Thru 3.25 in
Output Torque @ RPM 225 in lb @ 1750 rpm, 246 in lb @ 1150 rpm
Service Factor 1
Input Configuration C-Face Quilled
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Bolt Centers w/ Vertical "J" Base Kit (in) 6.42 x 2
Shaft Size 0.625
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Ratio 15:1
O.D. 0.625 in
Thermal Input Horsepower @ RPM 0.36 hp @ 1150 rpm, 0.49 hp @ 1750 rpm
Input Speed 1750 rpm
Frame 56C
Motor Frame Size 56C
No. of Gear Reductions Single
Input Dia. 0.625 in
Shaft Seal Material Nitrile
Input HP 0.56 @ 1750 RPM
Input HP @ RPM 0.36 hp @ 1150 rpm, 0.49 hp @ 1750 rpm
Output Shaft Key Square 0.188
Thermal Input Horsepower @ 1750 RPM 0.49 hp
Box Length 4 in
Reducer Style Standard
Output Shaft Thrust Load [Max] 1156
HP Range 1/2 to 3/4 HP (< 1)
Output Shaft Solid
Torque Out @ 1750 rpm 225 in lb
Gear Drive Reductions Single
Input (Shaft or Bore) Size 5/8 in
Output Shaft Key Length 1.5
Motor Application General Purpose
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Box Width 2.88 in
Max. Input HP @ 100 rpm 0.04 hp
Washdown Duty No
Output Torque Rating Range [Min] 250 in lbs
Output (Shaft or Bore) Size 5/8 in
Frame Size 56C
Output Configuration Left Output
Thermal Output Torque @ RPM 225 in lb @ 1750 rpm, 246 in lb @ 1150 rpm
Input Bore (C Face) 0.625 in
Housing Material Cast Iron
Gear Type Worm
Output RPM 116.6
Output RPM @ 1750 rpm Input 117 rpm
Mechanical Output Torque Rating 292 @ 1750 Input
HP @ RPM 0.3333333 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm
Assembly Q-L
Base to Shaft Center Height w/Std. Base Kit 2 1/4 in
Thermal Output Torque Rating 292 @ 1750 Input
Max. Overhung Load @ RPM 458 lbf @ 1750 rpm
Center Distance 1.33 in
Output Torque Rating Range [Max] 500 in lbs
Efficiency 0.8
Max. Overhung Load @ 1750 rpm 458 lbf
Bolt Centers w/ Vertical Base Kits (in) 6 5/32 x 3 1/4
Weight 17.0 LB
EAN or UPC 662288337676
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison