Find a Service Center
Alternate Products
- 0.563 in Shaft Diameter
- 1.25 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 1.25 in |
| Design | CRW1 |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Solid | Yes |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 664 ft/min |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Overall Width | 0.25 in |
| Case Material | Steel |
| Bore Sealant | Bore Tite |
| Pressure | 10 psi |
| Temperature Range [Min] | -65 °F |
| Seal Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel |
| Shaft Dia. | 0.563 in |
| Lip Style | Internal |
| Weight | 0.072 LB |
| EAN or UPC | 85311003957 |
