Find a Service Center
Alternate Products
- 0.938 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Surface Speed [Nom] | 1,106 ft/min |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Width | 1.752 in |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRW1 |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Case Design | Metal Case |
| Lip Style | Internal |
| Housing Bore Dia. | 1.752 in |
| Shaft Dia. | 0.938 in |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Spring Type | Garter |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.25 in |
| Spring Material | Carbon Steel |
| Weight | 0.077 LB |
| EAN or UPC | 85311007290 |
| NSN Number | 5330-00-360-4255 |
