Find a Service Center
Alternate Products
- 9.5 in Shaft Diameter
- 11.5 in Housing Bore
- 0.625 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Overall Width | 0.625 in |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Construction | CRW1 |
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Housing Bore Dia. | 11.5 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 9.5 in |
| Weight | 1.346 LB |
| EAN or UPC | 85311040884 |
