Find a Service Center
Alternate Products
- 0.375 in Inner Diameter
- 0.875 in Outer Diameter
- Single Row
- 0.281 in Overall Width
- 2 Seals
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
| Cage Type | Metal |
| Open Width | 7/32 in |
| Relubricatable | No |
| Width | 9/32 in |
| Fillet Radius | 0.016 in |
| No. of Rows | 1 |
| Precision Class | ISO P0 |
| Rolling Element | Ball |
| Static Load Rating [Max] | 312.00 lbf |
| Precision | Standard |
| Cage Material | Steel |
| Seal Type | Contact Seals |
| Dynamic Load Rating | 830.00 lbf |
| Inner Ring Width | 9/32 in |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Rolling Element Material | Steel |
| No. in Set | Single Bearing |
| Seal Material | Buna-N |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Internal Clearance | C3 |
| Material | Steel |
| Temperature Range [Max] | 275 °F |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closure Type | 2 Seals |
| O.D. Type | Straight |
| Temperature Range [Min] | -30 °F |
| Bearing Type | Radial |
| I.D. | 3/8 in |
| Fillet Radius Cone | 0.016 in, 0.41 mm |
| Overall Width | 0.281 in, 7 mm |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Enclosure | Double Sealed |
| Outer Ring Width | 9/32 in |
| Closed Width | 9/32 in |
| O.D. | 7/8 in |
| Capacity | Standard Capacity |
| Lubricant | Polyurea Base |
| Bearing Material | Steel |
| Ball Material | Steel |
| icNumber | 7696119 |
| Inch/Metric | Inch Bore |
| Weight | 0.044 LB |
| EAN or UPC | 87796044272 |
| NSN Number | 3110-00-520-3877 |
