Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 40 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.25 in |
| Pitch Dia. | 4.775 in |
| Teeth Face Width | 1.25 in |
| Outside Dia. | 4.745 in |
| Hub Type | A |
| Finished Bore | N/A |
| Material Internal Use | Carbon Steel |
| Material | Steel |
| Bore Range [Max] | 2 in |
| Type | KF-1 |
| Bore Size [Min] | 0.5 in |
| Belt Pitch | 3/8 in |
| Pitch Diameter | 4.775 in |
| Bore Type | Bushed |
| Bore Size [Max] | 2 in |
| Flange O.D. | 4.997 in |
| Belt Width | 1 in |
| Bushing Bore Size [Max] | 2 in |
| Width Across Teeth | 1.063 in |
| Belt Size | L |
| Bushing Bore Size [Min] | 0.5 in |
| Bushing Series | 2012 |
| No. of Teeth | 40 |
| Bushing Type | Taper-Lock |
| Bore Range [Min] | 0.5 in |
| Material External Use | Steel |
| Construction Internal | Solid |
| Weight | 3.8 LB |
| EAN or UPC | 697950083902 |
