Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 40 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | KF-1 |
| Bushing Bore Size [Max] | 2 in |
| Pitch Diameter | 4.775 in |
| Bore Type | Bushed |
| Material | Steel |
| Teeth Face Width | 1.25 in |
| No. of Teeth | 40 |
| Bore Range [Max] | 2 in |
| Bore Size [Min] | 0.5 in |
| Bushing Series | 2012 |
| Belt Width | 1 in |
| Flange O.D. | 4.997 in |
| Finished Bore | N/A |
| Bushing Bore Size [Min] | 0.5 in |
| Belt Pitch | 3/8 in |
| Belt Size | L |
| Outside Dia. | 4.745 in |
| Material External Use | Steel |
| Pitch Dia. | 4.775 in |
| Bore Range [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Length Through Bore | 1.25 in |
| Material Internal Use | Carbon Steel |
| Hub Type | A |
| Bore Size [Max] | 2 in |
| Bushing Type | Taper-Lock |
| Construction Internal | Solid |
| Weight | 3.8 LB |
| EAN or UPC | 697950083902 |
