Find a Service Center
- 1.619 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 390 °F |
| Housing Bore Dia. | 2 in |
| Temperature Range [Max] | 400 °F |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 1,916 ft/min |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRW1 |
| Overall Width | 0.25 in |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -5 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Shaft Dia. | 1.619 in |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Lip Style | Internal |
| Weight | 0.039 LB |
| EAN or UPC | 85311086523 |
