Find a Service Center
- 4.5 in Shaft Diameter
- 5.5 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Fluorocarbon Rubber (FKM) |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRWH1 |
| Bore Sealant | Bore Tite |
| Case Construction | Steel Case w/Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Temperature Range [Max] | 400 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Spring Material | Stainless Steel |
| Design | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Solid | Yes |
| Spring Type | Garter |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 5.501 in |
| Case Material | Steel |
| Seal Application | General Purpose |
| Shaft Dia. | 4.5 in |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 390 °F |
| Overall Width | 0.435 in |
| Seal Type | Oil |
| Weight | 0.51 LB |
| EAN or UPC | 85311885225 |
