Find a Service Center
Boston Gear
F7715-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834958
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Center Distance | 1.54 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Box Length | 5 1/8 in |
| Box Width | 5 1/16 in |
| Output Bore Shaft Dia. | 0.75 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output (Shaft or Bore) Size | 3/4 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Rated Efficiency | 92% |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Torque Out @ 1150 rpm | 350 in lb |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Frame | 56C |
| Input HP @ RPM | 1.2 hp @ 1750 rpm, 0.73 hp @ 1150 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Frame Size | 56C |
| Washdown Duty | No |
| Output Shaft Projection | Solid Right Output |
| Output Speed | 175 rpm |
| Base | No |
| Input Configuration | C-Face Quilled |
| Series | 700 |
| Media Mapping Output | J |
| Output Configuration | Right Output |
| Housing Material | Cast Iron |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Output Torque | 397 lb-in |
| Motor Application | General Purpose |
| Media Mapping Style | F |
| Bore Code | B5 |
| Worm Position | Universal |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Keyway Size | 3/16 x 3/32 |
| Box Height | 5 3/8 in |
| Output Shaft | Solid |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Lubrication | None |
| Torque Out @ 1750 rpm | 397 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Motor HP | 1 hp |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Output Torque @ RPM | 397 in lb @ 1750 rpm, 350 in lb @ 1150 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Motor Frame Size | B556C |
| Family Name | F |
| Ratio | 10:1 |
| Input Motor HP | 1 |
| Base Mounting Attachment | No Base |
| Center Distance Code | 715 |
| Style | Right Angle |
| Standard | AGMA Service Class I |
| Use With | 715 |
| Shaft Assembly Code | J |
| Input (Shaft or Bore) Size | 5/8 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Weight | 17.1 LB |
| EAN or UPC | 781711519028 |
