Skip to content Skip to navigation menu


FWC721-600-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #102211366
each
    Shipment Options

Product details

  • 2 1/16" Center Distance
  • 600:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace
  • Do not use round pin shackles in rigging applications
  • Screw pin shackles should not be used if there will be movement on the pin
  • Movement could cause the pin to unscrew and drop the load
  • Always stand clear of loads being lifted

Specifications

Bolt Center 5 in x 2 7/8 in
Box Height 6 25/64 in
Base to Centerline of Output Shaft 2 9/32 in
Ratio 600:1
Washdown Duty No
Lubrication None
Input Configuration C-Face Quilled
Box Length 5 13/64 in
Housing Material Cast Iron
Box Width 9 55/64 in
Torque Out @ 1750 rpm 1025 in lb
Bore Code B5
Worm Position Universal¦Right Angle
Fan Cooled No
Thermal Input Horsepower @ 1750 RPM N/A
Output (Shaft or Bore) Size 1 in
Reduction Type Double Reduction
Output Configuration Left Output
Torque Out @ 1150 rpm N/A
Frame Size 56C
Motor Application General Purpose
Family Name FWC
Center Distance 2 1/16 in
Base to Centerline of Input Shaft N/A
Max. Overhung Load @ 1750 rpm 700 lb/in
Max. Thrust Load @ 1150 rpm 700 lb/in
HP @ RPM 0.1666667 hp @ 1800 rpm
Output RPM @ 1750 rpm Input 2.92 rpm
Input (Shaft or Bore) Size 5/8 in
Frame 56C
Shaft Assembly Code G
Weight 35.1 LB
EAN or UPC 781711524503
Close Compare List Open Compare List Toggle

Product Comparison