Skip to content Skip to navigation menu


700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101872206
    Shipment Options

Product details

  • 3 1/4" Center Distance
  • 100:1 Ratio
  • 140TC or 180C Frame
  • C-Face Quilled Input
  • Left Output


  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760


  • Must be filled to the proper level with the recommended lubricant for your application before operation


Output (Shaft or Bore) Size 1 3/8 in
Input (Shaft or Bore) Size 7/8 in
Max. Overhung Load @ 1750 rpm 1300 lb/in
Input Configuration C-Face Quilled
Base to Shaft Center Height w/High Vert. Base Kit 6 1/4 in
Washdown Duty No
Center Distance 3.25 in
Base to Centerline of Output Shaft 3 in
Output RPM @ 1750 rpm Input 17.5 rpm
Bolt Centers w/ Std. Base Kit (in) 9 1/2 x 6 1/8
Max. Thrust Load @ 1150 rpm 1100 lb/in
Shaft Assembly Code G
Fan Cooled No
Base to Centerline of Input Shaft N/A
Torque Out @ 1150 rpm N/A
Family Name FWC
Bolt Center 7 1/2 in x 4 in
Box Width 13 in
Ratio 100:1
Worm Position Universal¦Right Angle
Motor HP 1.5 hp
HP @ RPM 1.5 hp @ 1800 rpm
Housing Material Cast Iron
Bore Code B7
Bolt Centers w/ Vertical Base Kits (in) 11.88 x 6.13
Reduction Type Double Reduction
Keyway Size 3/16 x 3/32
Base to Shaft Center Height w/Low Vert. Base Kit 4.69 in
Frame Size 140TC, 180C
Lubrication None
Motor Application General Purpose
Box Length 7 5/8 in
Base to Shaft Center Height w/Std. Base Kit 6 3/4 in
Output Configuration Left Output
Box Height 9 3/8 in
Torque Out @ 1750 rpm 3450 in lb
Frame 140TC, 180C
Thermal Input Horsepower @ 1750 RPM N/A
Weight 80.1 LB
EAN or UPC 781711532669
Close Compare List Open Compare List Toggle

Product Comparison