Skip to content Skip to navigation menu


400251

V-Rings

Item #100916102
each
    Shipment Options

Product details

  • 1" Shaft Diameter
  • 1.470" Housing Bore Diameter
  • 0.350" Width
  • Nitrile
  • Type VR2

description

  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.

features

  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required

Specifications

Seal Design Molded Design
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Pressure Differential [Max] 4.35 psi
Shoulder Width 1.47 in
Seal Material Nitrile Rubber (NBR)
Pressure 10 psi
Case Construction All Rubber
Shaft Dia. [Max] 1.06 in, 27 mm
Construction VR2
Temperature Range [Min] -40 °F
Lip Type Face Seal
Operating Temperature [Max] 210 °F
Overall Width 0.31 in, 10.5 mm
Operating Temperature [Min] -40 °F
Design VR2
Lip Style External
Seal Application Dirt Exclusion
Shaft Dia. 1 in
Temperature Range [Max] 225 °F
I.D. 0.87 in, 22 mm
Cross Section 0.35 in, 9 mm
Cover/Compensation Ring/Plate Required No
Lip Material Nitrile
Pressure [Max] 10 psi
Inch/Metric Metric
Shaft Dia. [Min] 0.94 in, 24 mm
Installation Streched On Shaft
Spring Material None
Weight 0.057 LB
EAN or UPC 85311044172
Close Compare List Open Compare List Toggle

Product Comparison