Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Low-speed spool
- Nine shaft options
- Speed sensors
- Five mounting styles
Specifications
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Port Size | 1/2-14 |
Splines | 0 |
Flange Orientation | Standard |
Bolt Circle Dia. | 3 1/4 in |
Pilot Diameter | 1.75 in |
Mounting Hole Size | 3/8-16 UNC-2B |
Pressure [Max] | 1800 psi |
Special Features Hardware Code | 00 |
Displacement | 96 cm3/Rev |
Paint | Primer Low Gloss Black |
Special Features Assembly Code | 0 |
Inlet Pressure [Max] | 2500 psi |
Flow Rate | 57 lpm |
Intermittent Pressure [Max] | 165 bar |
Duty | Standard-Duty |
RPM [Min] | 585 rpm |
Material | Cast Iron |
RPM [Max] | 585 rpm |
Port Type | NPTF |
Seal Material | Buna-N |
Flow [Max] | 15 gal/min |
Case Drain Code | 0 |
Port Location | Side Port |
Motor Element | Gerotor |
Paint/Packaging | Low Gloss Black, Individual Box |
Displacement (in³/rev) | 5.9 |
Mounting Holes | 3/8-16 |
Shaft Type | Straight w/ Woodruff Key |
Series | H Series |
Rotation | Standard Rotation |
Mount Type | 4 Bolt |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Mounting Type Code | B |
Shaft Size & Type | 1 in x 1/4 in Straight |
Case Drain | None |
Torque | 155 Nm |
Port Code | B |
Port Size & Location | 1/2 in NPTF Side |
Motor Type | Spool Valve |
Output Shaft Code | 01 |
Paint Code | A |
Corrosion Resistant | No |
Weight | 11.8 LB |