Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Intermittent Pressure [Max] | 155 bar |
| Brake Type | Hydraulic |
| Recommended System Working Temperature [Min] | -30 °F |
| Pressure [Max] | 1650 psi |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Output Shaft Type | Straight |
| Series | H Series |
| Seal Options | Standard |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| Port Code | B |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mount Type | 4 Bolt |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Paint Code | J |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Port Type | NPTF |
| RPM [Min] | 353 rpm |
| Port Size | 1/2-14 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Front Seal Kit If Available | 60540-000 |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Recommended System Working Temperature [Max] | 180 °F |
| Design Code | 9 |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| RPM [Max] | 353 rpm |
| Torque | 233 Nm |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 9.7 |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Port Size & Location | 1/2 in NPTF Side |
| Displacement | 159 cm3/Rev |
| Case Drain | None |
| Mounting Type Code | B |
| Duty | Standard-Duty |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Weight | 12.5 LB |
