Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Seal Options | Standard |
| Port Type | Manifold, O-Ring |
| Pilot Diameter | 1.75 in |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Size & Location | Manifold, 5/16-18 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Case Drain | None |
| Pressure [Max] | 1650 psi |
| Port Code | C |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Brake Type | Hydraulic |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Case Drain Code | 0 |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Max] | 353 rpm |
| Design Code | 9 |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Flow Rate | 57 lpm |
| Torque | 233 Nm |
| Front Seal Kit If Available | 60540-000 |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Displacement | 159 cm3/Rev |
| Intermittent Pressure [Max] | 155 bar |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Output Shaft Type | Straight |
| Mount Type | 4 Bolt |
| Material | Cast Iron |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Output Shaft Code | 01 |
| Paint Code | J |
| Displacement (in³/rev) | 9.7 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Location | Side Port |
| RPM [Min] | 353 rpm |
| Recommended System Working Temperature [Max] | 180 °F |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Weight | 12.45 LB |
