Skip to content Skip to navigation menu


17Q50L56

TIGEAR-2 Right Angle Worm Gear Reducer

Item #101914284
each
    Shipment Options

Product details

  • 1.75 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Left Output

features

  • Totally enclosed, ventless sealing system
  • Factory filled synthetic lubricant
  • HNBR seal material provides better wear and temperature range
  • Increased gear precision and accuracy
  • Seal journals held to exacting tolerances
  • Higher torque capacity
  • Greater efficiency
  • Cooler operating temperatures
  • Left, right or hollow output shafts

compliances

  • 0

options

  • Base kits
  • Tie rods
  • Output brackets

Specifications

Bolt Pattern 4.19 x 2.75
Bolt Centers w/ Vertical "J" Base Kit (in) 8.35 x 2.50
Horsepower Output 0.34 hp
Seal Type Single-Lip Contact
Torque Out @ 1750 rpm 608 in lb
Box Height 5.85 in
Lubrication PAG, Standard Temperature
Output RPM @ Input RPM 35 rpm @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 5.875 x 4.5
Input Configuration C-Face Quilled
Box Length 5 1/2 in
Input Style Quill
Box Width 4.89 in
Input (Shaft or Bore) Size 5/8 in
Input HP @ RPM 0.51 hp @ 1750 rpm
Center Distance 1.75 in
Output Configuration Left Output
Output Torque @ RPM 608 in lb @ 1750 rpm
Motor Application General Purpose
Frame 56C
Housing Material Cast Iron
HP @ RPM 0.5 hp @ 1800 rpm
Nominal Ratio 50
Output (Shaft or Bore) Size 7/8 in
Output Shaft Diameter 0.875 in
Output Style Left
Ratio 50:1
Frame Size 56C
Overhung Load 1190 lbf
Output RPM @ 1750 rpm Input 35 rpm
Weight 25.44 LB
EAN or UPC 782475746767
Close Compare List Open Compare List Toggle

Product Comparison