Skip to content Skip to navigation menu


SCM Series Medium-Duty Pillow Block

Item #100000067
    Shipment Options

Alternate Products

Product details

  • 2 3/16" Shaft
  • 2 3/4" Base to Center
  • Setscrew Locking Inner Ring
  • 6 7/8" to 7 15/16" Bolt Spacing
  • Medium-Duty


  • Air handling
  • Unit handling
  • Food and beverage
  • Forest products
  • Paper
  • Automotive
  • Chemical
  • Packaging and processing


  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with added strength
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
  • Medium-duty utilizes larger rings and housing compared to standard-duty
  • Open and closed safety covers available


Bolt Hole Spacing Range [Min] 6 7/8 in
Bearing Design Non-Expansion
Housing Height 5 13/32 in
Base Length 9 1/2 in
Bolt Holes 2
Length Through Bore 1 63/64 in
Misalignment Range ±2°
Base Width 2 3/8 in
Bolt Hole Spacing Range [Max] 7 15/16 in
Bolt Hole Spacing 7 13/32 in
Inch/Metric Inch
Bearing Type Ball Bearing
Mounted Unit Duty Medium-Duty
Outer Ring Size 212
Bearing Insert INSSCM203
Series P2BSCM
Bolt Hole Length 1 7/32 in
Seal Type Contact Seals
Housing Construction 1 Piece
Shaft Dia. 2 3/16 in
Pillow Block Type Thru-Bolt
Base Height 7/8 in
Locking Device Setscrew Locking Inner Ring
End Type Open End
Insert Type Steel Insert
Lubrication Relubricatable
Housing Material Cast Iron
Weight 9.44 LB
EAN or UPC 782475116348
Close Compare List Open Compare List Toggle

Product Comparison