Skip to content Skip to navigation menu


SCM Series Medium-Duty Pillow Block

Item #100000068
    Shipment Options

Alternate Products

Product details

  • 2 15/16" Shaft
  • 3 1/2" Base to Center
  • Setscrew Locking Inner Ring
  • 8 1/2" to 9 1/2" Bolt Spacing
  • Medium-Duty


  • Air handling
  • Unit handling
  • Food and beverage
  • Forest products
  • Paper
  • Automotive
  • Chemical
  • Packaging and processing


  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with added strength
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
  • Medium-duty utilizes larger rings and housing compared to standard-duty
  • Open and closed safety covers available


Base Length 11 3/4 in
Bearing Type Ball Bearing
Base Height 1 1/4 in
Bolt Hole Spacing 9 in
Bolt Hole Spacing Range [Max] 9 1/2 in
Pillow Block Type Thru-Bolt
Misalignment Range ±2°
Housing Material Cast Iron
Shaft Dia. 2 15/16 in
Series P2BSCM
Lubrication Relubricatable
Insert Type Steel Insert
Base Width 3 in
Housing Construction 1 Piece
Bearing Design Non-Expansion
Housing Height 6 31/32 in
Bolt Holes 2
Bolt Hole Spacing Range [Min] 8 1/2 in
Length Through Bore 2 11/32 in
Locking Device Setscrew Locking Inner Ring
Mounted Unit Duty Medium-Duty
Bearing Insert INSSCM215
Inch/Metric Inch
Bolt Hole Length 1 7/16 in
Seal Type Contact Seals
End Type Open End
Outer Ring Size 216
Weight 18.73 LB
EAN or UPC 782475116393
Close Compare List Open Compare List Toggle

Product Comparison