Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Low-speed spool
- Nine shaft options
- Speed sensors
- Five mounting styles
Specifications
Mounting Hole Size | 3/8-16 UNC-2B |
Corrosion Resistant | No |
Motor Type | Spool Valve |
Series | H Series |
Port Size | 7/8-14 |
Splines | 0 |
RPM [Max] | 585 rpm |
Intermittent Pressure [Max] | 165 bar |
Mounting Type Code | B |
Case Drain Code | 0 |
Output Shaft Code | 01 |
Flow [Max] | 15 gal/min |
Bolt Circle Dia. | 3 1/4 in |
Displacement | 96 cm3/Rev |
Displacement (in³/rev) | 5.9 |
Flange Orientation | Standard |
Special Features Hardware Code | 00 |
Torque | 155 Nm |
Paint Code | J |
Pressure [Max] | 1800 psi |
Mounting Holes | 3/8-16 |
Shaft Size & Type | 1 in x 1/4 in Straight |
RPM [Min] | 585 rpm |
Rotation | Standard Rotation |
Port Code | A |
Material | Cast Iron |
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Duty | Standard-Duty |
Paint | Low Gloss Black 2 Mils Min Thick |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Shaft Type | Straight w/ Woodruff Key |
Flow Rate | 57 lpm |
Seal Material | Buna-N |
Special Features Assembly Code | 0 |
Port Type | SAE O-Ring |
Motor Element | Gerotor |
Mount Type | 4 Bolt |
Pilot Diameter | 1.75 in |
Port Size & Location | SAE-10 Side |
Port Location | Side Port |
Case Drain | None |
Paint/Packaging | Low Gloss Black, Individual Box |
Inlet Pressure [Max] | 2500 psi |
Weight | 11.5 LB |