Product details
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Nine shaft options
- Five mounting styles
- Low-speed spool
- Speed sensors
Specifications
Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
Case Drain Code | 0 |
Duty | Standard-Duty |
Seal Material | Buna-N |
Special Features | None |
Motor Element | Gerotor |
Mount Type | 4 Bolt |
Port Type | Manifold, O-Ring |
Pilot Diameter | 1.75 in |
Rotation | Standard Rotation |
Output Shaft Code | 01 |
Shaft Type | Straight w/ Woodruff Key |
Series | H Series |
Corrosion Resistant | No |
Material | Cast Iron |
Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
Flow [Max] | 15 gal/min |
Inlet Pressure [Max] | 2500 psi |
Mounting Hole Size | 3/8-16 UNC-2B |
Torque | 351 Nm |
Special Features Assembly Code | 0 |
Shaft Size & Type | 1 in x 1/4 in Straight |
Paint/Packaging | Low Gloss Black, Individual Box |
RPM [Max] | 192 rpm |
RPM [Min] | 192 rpm |
Special Features Hardware Code | 00 |
Bolt Circle Dia. | 3 1/4 in |
Splines | 0 |
Port Location | Side Port |
Flow Rate | 57 lpm |
Mounting Type Code | B |
Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
Pressure [Max] | 1350 psi |
Displacement | 294 cm3/Rev |
Displacement (in³/rev) | 17.9 |
Paint | Primer Low Gloss Black |
Case Drain | None |
Intermittent Pressure [Max] | 124 bar |
Flange Orientation | Standard |
Motor Type | Spool Valve |
Mounting Holes | 3/8-16 |
Paint Code | A |
Port Code | C |
Weight | 14.0 LB |