Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
Specifications
Material | Cast Iron |
Displacement | 96 cm3/Rev |
Shaft Size & Type | 1 in x 1/4 in Straight |
Mounting Holes | 0.535 in |
Flange Orientation | Standard |
Mounting Hole Size | 0.54 in |
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Torque | 155 Nm |
Port Location | Side Port |
Mounting Type Code | A |
Corrosion Resistant | No |
Port Size | 1/2-14 |
Case Drain | None |
Displacement (in³/rev) | 5.9 |
RPM [Max] | 585 rpm |
Paint Code | A |
Port Type | NPTF |
Intermittent Pressure [Max] | 165 bar |
Paint/Packaging | Low Gloss Black, Individual Box |
Bolt Circle Dia. | 4.19 in |
Rotation | Standard Rotation |
Special Features Assembly Code | 0 |
Flow Rate | 57 lpm |
Shaft Type | Straight w/ Woodruff Key |
Flow [Max] | 15 gal/min |
Paint | Primer Low Gloss Black |
Port Size & Location | 1/2 in NPTF Side |
Case Drain Code | 0 |
Pilot Diameter | 3.25 in |
Splines | 0 |
Special Features Hardware Code | 00 |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Seal Material | Buna-N |
Pressure [Max] | 1800 psi |
Duty | Standard-Duty |
Inlet Pressure [Max] | 2500 psi |
Motor Element | Gerotor |
Series | H Series |
RPM [Min] | 585 rpm |
Mount Type | 2 Bolt |
Motor Type | Spool Valve |
Port Code | B |
Output Shaft Code | 01 |
Weight | 12.25 LB |