Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
Specifications
Splines | 0 |
Mounting Holes | 0.535 in |
Port Size | 7/8-14 |
Special Features Hardware Code | 00 |
Port Location | Side Port |
Corrosion Resistant | No |
Port Code | A |
Motor Element | Gerotor |
Inlet Pressure [Max] | 2500 psi |
Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
Displacement (in³/rev) | 22.58 |
Displacement | 370 cm3/Rev |
Material | Cast Iron |
Flange Orientation | Standard |
RPM [Min] | 152 rpm |
Bolt Circle Dia. | 4.187 in |
Mounting Hole Size | 0.54 in |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
Seal Material | Buna-N |
Case Drain Code | 0 |
Pilot Diameter | 3.25 in |
Pressure [Max] | 1250 psi |
Duty | Standard-Duty |
Series | H Series |
Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
Mounting Type Code | A |
Flow [Max] | 15 gal/min |
Port Type | SAE O-Ring |
Shaft Size & Type | 1 in x 1/4 in Straight |
Intermittent Pressure [Max] | 103 bar |
Paint | Primer Low Gloss Black |
Special Features Assembly Code | 0 |
Shaft Type | Straight w/ Woodruff Key |
Case Drain | None |
Rotation | Standard Rotation |
RPM [Max] | 152 rpm |
Mount Type | 2 Bolt |
Output Shaft Code | 01 |
Flow Rate | 57 lpm |
Paint Code | A |
Motor Type | Spool Valve |
Port Size & Location | SAE-10 Side |
Torque | 407 Nm |
Weight | 15.15 LB |