Skip to content Skip to navigation menu


101-1045-009

Cast Iron 2 Bolt Spool Geroler

Item #100152231
each
    Shipment Options

Product details

  • Spool Valve Motor
  • Cast Iron Material
  • Manifold, O-Ring Port
  • 2 Bolt Mount
  • Straight Output Shaft

description

  • Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.

applications

  • Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers

features

  • Compact yet powerful
  • Extended bearing life
  • Increased shaft seal

options

  • Nine shaft options
  • Five mounting styles
  • Low-speed spool
  • Speed sensors

Specifications

Displacement (in³/rev) 11.3
RPM [Min] 304 rpm
Port Size Manifold, 5/16-18 UNC Threads, 5/16-18 UNC
Pressure [Max] 1600 psi
Mounting Hole Size 0.54 in
Seal Material Buna-N
Port Type Manifold, O-Ring
Output Shaft Code 01
Paint/Packaging Low Gloss Black, Individual Box
Paint Low Gloss Black 2 Mils Min Thick
Bolt Circle Dia. 4.19 in
Output Torque at Rated PSI (inch/pounds) 2345.45 in lb
Corrosion Resistant No
Inlet Pressure [Max] 2500 psi
Mount Type 2 Bolt
Flow Rate 57 lpm
Series H Series
Shaft Type Straight w/ Woodruff Key
Motor Type Spool Valve
Maximum Speed @ Continuous Flow 304 rpm @ 15 gal/min
Flow [Max] 15 gal/min
Splines 0
Mounting Holes 0.535 in
Special Features Hardware Code 00
Paint Code J
Port Code C
Special Features None
Mounting Type Code A
Case Drain Code 0
Displacement 185 cm3/Rev
Shaft Size & Type 1 in x 1/4 in Straight
Case Drain None
Special Features Assembly Code 0
Port Location Side Port
Intermittent Pressure [Max] 148 bar
Rotation Standard Rotation
Motor Element Gerotor
Flange Orientation Standard
Material Cast Iron
Torque 265 Nm
Duty Standard-Duty
Pilot Diameter 3.25 in
RPM [Max] 304 rpm
Weight 13.5 LB
Close Compare List Open Compare List Toggle

Product Comparison