Char-Lynn
101-1048-009
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Item #100152234
each
Product details
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Nine shaft options
- Five mounting styles
- Low-speed spool
- Speed sensors
Specifications
Motor Type | Spool Valve |
Paint Code | A |
Duty | Standard-Duty |
Mount Type | 2 Bolt |
Seal Material | Buna-N |
Flow [Max] | 15 gal/min |
Pilot Diameter | 3.25 in |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Type | Manifold, O-Ring |
Case Drain Code | 0 |
Special Features | None |
Inlet Pressure [Max] | 2500 psi |
Paint | Primer Low Gloss Black |
Shaft Type | Straight w/ Woodruff Key |
Port Location | Side Port |
Port Code | C |
Splines | 0 |
Special Features Assembly Code | 0 |
Torque | 407 Nm |
Motor Element | Gerotor |
Pressure [Max] | 1250 psi |
Shaft Size & Type | 1 in x 1/4 in Straight |
RPM [Max] | 152 rpm |
Flow Rate | 57 lpm |
Output Shaft Code | 01 |
Rotation | Standard Rotation |
Corrosion Resistant | No |
Mounting Hole Size | 0.54 in |
Displacement | 370 cm3/Rev |
Series | H Series |
Mounting Holes | 0.535 in |
Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
Special Features Hardware Code | 00 |
Case Drain | None |
Material | Cast Iron |
Mounting Type Code | A |
Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
Intermittent Pressure [Max] | 103 bar |
Flange Orientation | Standard |
RPM [Min] | 152 rpm |
Bolt Circle Dia. | 4.19 in |
Displacement (in³/rev) | 22.6 |
Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
Weight | 15.5 LB |