Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Paint Code | A |
Special Features | None |
Port Type | NPTF |
Flow Rate | 57 lpm |
Bolt Circle Dia. | 3 1/4 in |
Mounting Type Code | B |
Shaft Type | Splined |
Displacement | 294 cm3/Rev |
Material | Cast Iron |
Special Features Assembly Code | 0 |
Intermittent Pressure [Max] | 124 bar |
Mount Type | 4 Bolt |
Flow [Max] | 15 gal/min |
Pressure [Max] | 1350 psi |
Motor Element | Gerotor |
Port Code | B |
Mounting Hole Size | 3/8-16 UNC-2B |
Port Size | 1/2-14 |
Inlet Pressure [Max] | 2500 psi |
Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
Special Features Hardware Code | 00 |
Port Size & Location | 1/2 in NPTF Side |
Motor Type | Spool Valve |
Torque | 351 Nm |
Paint/Packaging | Low Gloss Black, Individual Box |
RPM [Min] | 192 rpm |
Series | H Series |
Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
Mounting Holes | 3/8-16 |
Case Drain Code | 0 |
Shaft Size & Type | 1 in - 6T Spline |
Splines | 6 |
RPM [Max] | 192 rpm |
Duty | Standard-Duty |
Case Drain | None |
Paint | Primer Low Gloss Black |
Rotation | Standard Rotation |
Port Location | Side Port |
Flange Orientation | Standard |
Pilot Diameter | 1.75 in |
Seal Material | Buna-N |
Displacement (in³/rev) | 17.9 |
Corrosion Resistant | No |
Output Shaft Code | 02 |
Weight | 14.0 LB |