Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
Mounting Holes | 0.535 in |
Flow Rate | 57 lpm |
Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
Displacement | 74 cm3/Rev |
Torque | 118 Nm |
Output Shaft Code | 01 |
Paint Code | A |
Port Code | B |
Material | Cast Iron |
Corrosion Resistant | No |
Pressure [Max] | 1800 psi |
Displacement (in³/rev) | 4.52 |
Series | H Series |
Motor Type | Spool Valve |
Paint/Packaging | Low Gloss Black, Individual Box |
Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
RPM [Min] | 760 rpm |
Seal Material | Buna-N |
Flow [Max] | 15 gal/min |
Shaft Type | Straight w/ Woodruff Key |
Mounting Type Code | A |
Intermittent Pressure [Max] | 165 bar |
Flange Orientation | Flange Rotated 90° |
Port Size | 1/2-14 |
Special Features Assembly Code | 2 |
Bolt Circle Dia. | 4.187 in |
Duty | Standard-Duty |
Mounting Hole Size | 0.54 in |
Port Type | NPTF |
Motor Element | Gerotor |
Shaft Size & Type | 1 in x 1/4 in Straight |
Special Features | Flange Rotated 90° |
Splines | 0 |
Port Location | Side Port |
Port Size & Location | 1/2 in NPTF Side |
Rotation | Flange |
Inlet Pressure [Max] | 2500 psi |
Paint | Primer Low Gloss Black |
Case Drain Code | 0 |
Special Features Hardware Code | 00 |
Case Drain | None |
RPM [Max] | 760 rpm |
Mount Type | 2 Bolt |
Pilot Diameter | 3.25 in |
Weight | 13.0 LB |