Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
RPM [Max] | 192 rpm |
Flow Rate | 57 lpm |
Shaft Type | Straight w/ Woodruff Key |
Paint Code | A |
Mounting Holes | 0.535 in |
Motor Type | Spool Valve |
Inlet Pressure [Max] | 2500 psi |
Port Type | NPTF |
Mounting Type Code | A |
Flange Orientation | Standard |
Special Features Hardware Code | AA |
Paint/Packaging | Low Gloss Black, Individual Box |
Torque | 351 Nm |
Duty | Standard-Duty |
Port Size | 1/2-14 |
Pilot Diameter | 3.25 in |
Corrosion Resistant | No |
Shaft Size & Type | 1 in x 1/4 in Straight |
Motor Element | Gerotor |
Displacement | 294 cm3/Rev |
Rotation | Standard Rotation |
Series | H Series |
Case Drain Code | 0 |
Mounting Hole Size | 0.54 in |
Output Shaft Code | 01 |
Flow [Max] | 15 gal/min |
Pressure [Max] | 1350 psi |
Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
Paint | Primer Low Gloss Black |
Material | Cast Iron |
RPM [Min] | 192 rpm |
Intermittent Pressure [Max] | 124 bar |
Special Features | Free Running Gerotor |
Bolt Circle Dia. | 4.19 in |
Special Features Assembly Code | 0 |
Port Size & Location | 1/2 in NPTF Side |
Mount Type | 2 Bolt |
Case Drain | None |
Seal Material | Buna-N |
Displacement (in³/rev) | 17.9 |
Port Code | B |
Geroter/Geroler Options | Free Running |
Splines | 0 |
Port Location | Side Port |
Weight | 13.0 LB |