Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
Pilot Diameter | 3.25 in |
Displacement | 74 cm3/Rev |
Paint | Primer Low Gloss Black |
Special Features Assembly Code | 0 |
Bolt Circle Dia. | 4.19 in |
Port Type | SAE O-Ring |
RPM [Max] | 760 rpm |
Mounting Type Code | A |
Special Features Hardware Code | AA |
Corrosion Resistant | No |
Motor Type | Spool Valve |
Inlet Pressure [Max] | 2500 psi |
Flow Rate | 57 lpm |
Displacement (in³/rev) | 4.5 |
Case Drain Code | 0 |
Shaft Size & Type | 1 in x 1/4 in Straight |
Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
Mounting Holes | 0.535 in |
RPM [Min] | 760 rpm |
Splines | 0 |
Output Shaft Code | 01 |
Seal Material | Buna-N |
Flange Orientation | Standard |
Port Code | A |
Mounting Hole Size | 0.54 in |
Torque | 118 Nm |
Rotation | Standard Rotation |
Pressure [Max] | 1800 psi |
Case Drain | None |
Motor Element | Gerotor |
Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
Paint/Packaging | Low Gloss Black, Individual Box |
Flow [Max] | 15 gal/min |
Shaft Type | Straight w/ Woodruff Key |
Port Size | 7/8-14 |
Special Features | Free Running Gerotor |
Port Location | Side Port |
Duty | Standard-Duty |
Paint Code | A |
Port Size & Location | SAE-10 Side |
Material | Cast Iron |
Series | H Series |
Mount Type | 2 Bolt |
Intermittent Pressure [Max] | 165 bar |
Weight | 13.0 LB |