Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Motor Element | Gerotor |
Port Location | Side Port |
Port Type | SAE O-Ring |
Motor Type | Spool Valve |
Case Drain Code | 0 |
Output Shaft Code | 08 |
Corrosion Resistant | No |
Special Features Assembly Code | 0 |
Special Features Hardware Code | 00 |
Mounting Hole Size | 0.54 in |
Paint | Primer Low Gloss Black |
Bolt Circle Dia. | 4.19 in |
Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
Seal Material | Buna-N |
Displacement (in³/rev) | 2.8 |
Torque | 73 Nm |
Port Size & Location | SAE-10 Side |
Series | H Series |
Duty | Standard-Duty |
Pressure [Max] | 1800 psi |
Mount Type | 2 Bolt |
RPM [Max] | 969 rpm |
Flange Orientation | Standard |
Case Drain | None |
Splines | 0 |
Rotation | Standard Rotation |
Paint/Packaging | Low Gloss Black, Individual Box |
Special Features | None |
Displacement | 46 cm3/Rev |
Port Size | 7/8-14 |
Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
Material | Cast Iron |
Flow [Max] | 12 gal/min |
Mounting Holes | 0.535 in |
Pilot Diameter | 3.25 in |
Inlet Pressure [Max] | 2500 psi |
Mounting Type Code | A |
Shaft Type | Straight w/ Cross Hole |
Flow Rate | 45 lpm |
Intermittent Pressure [Max] | 165 bar |
Port Code | A |
Shaft Size & Type | Straight |
RPM [Min] | 969 rpm |
Paint Code | A |
Weight | 11.2 LB |