Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Inlet Pressure [Max] | 2500 psi |
Shaft Size & Type | 1 in - 6T Spline |
Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
Port Location | Side Port |
RPM [Max] | 353 rpm |
Paint | Primer Low Gloss Black |
Output Shaft Code | 02 |
Flow Rate | 57 lpm |
Splines | 6 |
Material | Cast Iron |
Displacement | 159 cm3/Rev |
Port Size & Location | SAE-10 Side |
Paint/Packaging | Low Gloss Black, Individual Box |
Corrosion Resistant | No |
Mounting Holes | 3/8-16 |
Case Drain | SAE-4 |
Mount Type | 4 Bolt |
Flow [Max] | 15 gal/min |
Special Features Hardware Code | 00 |
Paint Code | A |
Seal Material | Buna-N |
Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
Pressure [Max] | 1650 psi |
Flange Orientation | Standard |
Case Drain Code | 1 |
Duty | Standard-Duty |
Pilot Diameter | 1.75 in |
Port Code | A |
Port Size | 7/8-14 |
Mounting Hole Size | 3/8-16 UNC-2B |
Special Features | None |
Special Features Assembly Code | 1 |
Mounting Type Code | B |
Rotation | Reverse |
Shaft Type | Splined |
Port Type | SAE O-Ring |
Motor Type | Spool Valve |
Motor Element | Gerotor |
Series | H Series |
Displacement (in³/rev) | 9.7 |
Torque | 233 Nm |
RPM [Min] | 353 rpm |
Intermittent Pressure [Max] | 155 bar |
Bolt Circle Dia. | 3 1/4 in |
Weight | 13.0 LB |