Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Intermittent Pressure [Max] | 138 bar |
Special Features | None |
Mounting Holes | 0.535 in |
Displacement | 231 cm3/Rev |
Mounting Type Code | A |
Mount Type | 2 Bolt |
Flange Orientation | Standard |
Output Shaft Code | 02 |
Rotation | Reverse |
Displacement (in³/rev) | 14.1 |
Flow [Max] | 15 gal/min |
RPM [Max] | 243 rpm |
Port Location | Side Port |
RPM [Min] | 243 rpm |
Flow Rate | 57 lpm |
Mounting Hole Size | 0.54 in |
Port Type | SAE O-Ring |
Torque | 302 Nm |
Bolt Circle Dia. | 4.187 in |
Special Features Assembly Code | 1 |
Material | Cast Iron |
Motor Element | Gerotor |
Case Drain Code | 1 |
Shaft Type | Splined |
Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
Series | H Series |
Port Size & Location | SAE-10 Side |
Corrosion Resistant | No |
Port Size | 7/8-14 |
Seal Material | Buna-N |
Splines | 6 |
Port Code | A |
Motor Type | Spool Valve |
Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
Paint Code | A |
Shaft Size & Type | 1 in - 6T Spline |
Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
Special Features Hardware Code | 00 |
Paint | Primer Low Gloss Black |
Duty | Standard-Duty |
Inlet Pressure [Max] | 2500 psi |
Pilot Diameter | 3.25 in |
Pressure [Max] | 1450 psi |
Weight | 13.0 LB |