Product details
- Spool Valve Motor
- Cast Iron Material
- G 1/2 Prort Size
- BSP Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
Inlet Pressure [Max] | 2500 psi |
Displacement (in³/rev) | 5.86 |
Splines | 0 |
RPM [Max] | 585 rpm |
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Corrosion Resistant | No |
Paint/Packaging | Low Gloss Black, Individual Box |
Motor Type | Spool Valve |
Motor Element | Gerotor |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Bolt Circle Dia. | 4.187 in |
Pilot Diameter | 3.25 in |
Case Drain Code | 2 |
Special Features Hardware Code | 00 |
Mounting Type Code | A |
Series | H Series |
Flow [Max] | 15 gal/min |
Case Drain | G 1/4 (BSP) |
Port Location | Side Port |
Rotation | Standard Rotation |
Duty | Standard-Duty |
Port Type | BSP |
Shaft Type | Straight w/ Woodruff Key |
Port Size | G 1/2 |
Paint | Primer Low Gloss Black |
Shaft Size & Type | 1 in x 1/4 in Straight |
Mount Type | 2 Bolt |
Seal Material | Buna-N |
Flange Orientation | Standard |
Mounting Holes | 0.535 in |
Special Features Assembly Code | 0 |
Port Code | E |
Material | Cast Iron |
Displacement | 96 cm3/Rev |
Torque | 155 Nm |
Flow Rate | 57 lpm |
Paint Code | A |
Mounting Hole Size | 0.54 in |
Special Features | None |
RPM [Min] | 585 rpm |
Intermittent Pressure [Max] | 165 bar |
Pressure [Max] | 1800 psi |
Output Shaft Code | 01 |
Weight | 13.0 LB |