Product details
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
Mounting Type Code | A |
Case Drain | G 1/4 (BSP) |
Seal Material | Buna-N |
Inlet Pressure [Max] | 2500 psi |
Shaft Size & Type | Straight |
Pilot Diameter | 3.25 in |
RPM [Min] | 304 rpm |
Torque | 265 Nm |
Pressure [Max] | 1600 psi |
Output Shaft Code | 24 |
Rotation | Standard Rotation |
Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
Series | H Series |
Displacement (in³/rev) | 11.29 |
Paint/Packaging | Low Gloss Black, Individual Box |
Bolt Circle Dia. | 4.187 in |
Special Features | None |
Case Drain Code | 2 |
Intermittent Pressure [Max] | 148 bar |
Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
Shaft Type | Straight |
Corrosion Resistant | No |
Special Features Assembly Code | 0 |
Material | Cast Iron |
Port Code | D |
Flange Orientation | Standard |
Paint | Primer Low Gloss Black |
Mounting Holes | 0.535 in |
Port Location | Side Port |
Mount Type | 2 Bolt |
Flow [Max] | 15 gal/min |
RPM [Max] | 304 rpm |
Splines | 0 |
Motor Type | Spool Valve |
Flow Rate | 57 lpm |
Mounting Hole Size | 0.54 in |
Special Features Hardware Code | 00 |
Port Size | Manifold, M8 x 1.25 Threads |
Paint Code | A |
Duty | Standard-Duty |
Displacement | 185 cm3/Rev |
Port Type | Manifold, O-Ring |
Motor Element | Gerotor |
Weight | 13.0 LB |