Product details
- Spool Valve Motor
- Cast Iron Material
- G 1/2 Prort Size
- BSP Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
RPM [Max] | 152 rpm |
Special Features Assembly Code | 0 |
Splines | 0 |
Shaft Type | Straight |
Shaft Size & Type | Straight |
Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
Flow Rate | 57 lpm |
Port Type | BSP |
Flange Orientation | Standard |
Displacement (in³/rev) | 22.58 |
Series | H Series |
Rotation | Standard Rotation |
Pilot Diameter | 3.25 in |
Pressure [Max] | 1250 psi |
Port Location | Side Port |
Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
Intermittent Pressure [Max] | 103 bar |
Special Features Hardware Code | 00 |
Torque | 407 Nm |
Case Drain Code | 2 |
Bolt Circle Dia. | 4.187 in |
Motor Element | Gerotor |
Displacement | 370 cm3/Rev |
Port Code | E |
Duty | Standard-Duty |
Special Features | None |
Material | Cast Iron |
Output Shaft Code | 24 |
Flow [Max] | 15 gal/min |
Port Size | G 1/2 |
Seal Material | Buna-N |
Corrosion Resistant | No |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
RPM [Min] | 152 rpm |
Mounting Type Code | A |
Mounting Hole Size | 0.54 in |
Mount Type | 2 Bolt |
Mounting Holes | 0.535 in |
Paint | Primer Low Gloss Black |
Inlet Pressure [Max] | 2500 psi |
Paint Code | A |
Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
Motor Type | Spool Valve |
Weight | 13.0 LB |