Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Speed sensors
- Low-speed spool
- Nine shaft options
Specifications
Pressure [Max] | 1800 psi |
Output Torque at Rated PSI (inch/pounds) | 496 in lb |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
Special Features | Free Running Gerotor |
Flange Orientation | Standard |
Port Type | SAE O-Ring |
Displacement (in³/rev) | 2.2 |
Flow Rate | 38.65 lpm |
Port Size & Location | SAE-10 Side |
Inlet Pressure [Max] | 2500 psi |
Paint | Primer Low Gloss Black |
Paint Code | A |
Displacement | 36 cm3/Rev |
Mounting Holes | 0.535 in |
Case Drain Code | 0 |
Rotation | Standard Rotation |
Geroter/Geroler Options | Free Running |
Duty | Standard-Duty |
Bolt Circle Dia. | 4.187 in |
Port Size | 7/8-14 |
Shaft Size & Type | 1 in x 1/4 in Straight |
Flow [Max] | 10 gal/min |
Shaft Type | Straight w/ Woodruff Key |
Port Code | A |
Pilot Diameter | 3.25 in |
Series | H Series |
Port Location | Side Port |
Special Features Hardware Code | AA |
Output Shaft Code | 01 |
Material | Cast Iron |
Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
RPM [Min] | 1021 rpm |
Splines | 0 |
Mount Type | 2 Bolt |
Motor Element | Gerotor |
Torque | 41.44 Nm |
Corrosion Resistant | No |
Motor Type | Spool Valve |
Mounting Type Code | A |
Seal Material | Buna-N |
Case Drain | None |
RPM [Max] | 1021 rpm |
Intermittent Pressure [Max] | 165 bar |
Special Features Assembly Code | 0 |
Mounting Hole Size | 0.54 in |
Weight | 11.55 LB |