Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
Specifications
Geroter/Geroler Options | Free Running |
Inlet Pressure [Max] | 2500 psi |
Displacement | 58 cm3/Rev |
Case Drain Code | 0 |
Port Code | A |
Special Features Hardware Code | AA |
Paint/Packaging | Low Gloss Black, Individual Box |
Pilot Diameter | 3.25 in |
Displacement (in³/rev) | 3.5 |
Shaft Type | Straight w/ Woodruff Key |
Port Location | Side Port |
Seal Material | Buna-N |
RPM [Max] | 953 rpm |
Mounting Holes | 0.535 in |
Mounting Hole Size | 0.54 in |
Duty | Standard-Duty |
Special Features Assembly Code | 0 |
Special Features | Free Running Gerotor |
Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
Flange Orientation | Standard |
RPM [Min] | 953 rpm |
Port Type | SAE O-Ring |
Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
Paint | Primer Low Gloss Black |
Torque | 91 Nm |
Case Drain | None |
Port Size & Location | SAE-10 Side |
Port Size | 7/8-14 |
Motor Element | Gerotor |
Pressure [Max] | 1800 psi |
Flow [Max] | 15 gal/min |
Bolt Circle Dia. | 4.19 in |
Corrosion Resistant | No |
Intermittent Pressure [Max] | 165 bar |
Mount Type | 2 Bolt |
Shaft Size & Type | 1 in x 1/4 in Straight |
Rotation | Standard Rotation |
Splines | 0 |
Material | Cast Iron |
Paint Code | A |
Flow Rate | 57 lpm |
Output Shaft Code | 01 |
Mounting Type Code | A |
Motor Type | Spool Valve |
Series | H Series |
Weight | 11.5 LB |