Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
Specifications
Special Features | Free Running Gerotor |
Flange Orientation | Standard |
Bolt Circle Dia. | 4.19 in |
Port Type | NPTF |
Displacement | 36 cm3/Rev |
Paint/Packaging | Low Gloss Black, Individual Box |
Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
RPM [Min] | 1021 rpm |
Mounting Type Code | A |
Case Drain Code | 0 |
Port Size | 1/2-14 |
Pilot Diameter | 3.25 in |
Torque | 56 Nm |
Mount Type | 2 Bolt |
Rotation | Standard Rotation |
Geroter/Geroler Options | Free Running |
Special Features Hardware Code | AA |
Inlet Pressure [Max] | 2500 psi |
Port Code | B |
Motor Element | Gerotor |
Mounting Holes | 0.535 in |
Pressure [Max] | 1800 psi |
Case Drain | None |
Paint Code | A |
Shaft Size & Type | 1 in x 1/4 in Straight |
Motor Type | Spool Valve |
Corrosion Resistant | No |
Splines | 0 |
Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
Material | Cast Iron |
Duty | Standard-Duty |
Port Location | Side Port |
RPM [Max] | 1021 rpm |
Port Size & Location | 1/2 in NPTF Side |
Displacement (in³/rev) | 2.2 |
Flow Rate | 38 lpm |
Special Features Assembly Code | 0 |
Series | H Series |
Seal Material | Buna-N |
Paint | Primer Low Gloss Black |
Shaft Type | Straight w/ Woodruff Key |
Mounting Hole Size | 0.54 in |
Intermittent Pressure [Max] | 165 bar |
Output Shaft Code | 01 |
Flow [Max] | 10 gal/min |
Weight | 11.6 LB |