Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
Specifications
Flow [Max] | 15 gal/min |
RPM [Min] | 469 rpm |
Port Location | Side Port |
Port Code | B |
Mount Type | 2 Bolt |
Case Drain | None |
Paint Code | A |
Output Shaft Code | 01 |
Pilot Diameter | 3.25 in |
Special Features Assembly Code | 0 |
Shaft Type | Straight w/ Woodruff Key |
Material | Cast Iron |
Flow Rate | 57 lpm |
Shaft Size & Type | 1 in x 1/4 in Straight |
Splines | 0 |
Motor Type | Spool Valve |
Mounting Holes | 0.535 in |
Bolt Circle Dia. | 4.19 in |
Seal Material | Buna-N |
Inlet Pressure [Max] | 2500 psi |
Pressure [Max] | 1800 psi |
Series | H Series |
Displacement (in³/rev) | 7.3 |
Port Size | 1/2-14 |
Paint/Packaging | Low Gloss Black, Individual Box |
Special Features Hardware Code | 00 |
Port Size & Location | 1/2 in NPTF Side |
Torque | 192 Nm |
Duty | Standard-Duty |
Case Drain Code | 0 |
Mounting Hole Size | 0.54 in |
Displacement | 120 cm3/Rev |
Flange Orientation | Standard |
Motor Element | Gerotor |
Corrosion Resistant | No |
Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
Intermittent Pressure [Max] | 165 bar |
Paint | Primer Low Gloss Black |
Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
Mounting Type Code | A |
Rotation | Standard Rotation |
Port Type | NPTF |
RPM [Max] | 469 rpm |
Weight | 12.1 LB |